Neumann SKM 185 MT Stereo Set includes Two Each: KM185, SG21BK, WNS100 in One Woodbox Matte Black Clearance Get Authentic

Neumann SKM 185 MT Stereo Set includes Two Each: KM185, SG21BK, WNS100 in One Woodbox Matte Black

The Neumann SKM185MT Stereo Set includes Two Each: KM185, SG21BK, WNS100 in One Woodbox | Matte Black is a kit containing a stereo matched pair of the KM 185 MT microphones. The microphones feature cardioid, pressure condenser elements intended for live sound reinforcement and broadcast as well as recording applications. The KM 180 series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal. The KM 185 MT is powered via +48 Volt phantom power.
The stereo pair are matched in sensitivity and frequency response and provide optimum results when capturing performances or ambiance. The 20Hz to 20kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 185 MT’s cardioid polar pattern provides a generous pick up area and is suitable for ambiance or spot miking instruments such as piano, wind instruments organ and choir. The KM 185 MT handles sound pressure levels up to 140dB allowing close miking of instruments high in transient (peak) level response.

Cardioid Polar Pattern
The cardioid polar pattern minimizes room ambiance and noise caused by additional instruments, monitors, vocalists etc. The KM 185 is suitable for X,Y style stereo capturing, percussion, wind instruments, piano, leslie speaker, and guitar amplifiers.
KM 100 Based Output Stage
The KM 185 MT features the same output stage electronics as the KM 100. Transformer-less circuitry and quiet balanced output design ensure a clean, high-gain output signal without any coloration. The KM 185 is powered via +48 Volt phantom power, and its 20-20kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 185 can handle sound pressure levels up to 138dB, allowing fairly close miking of instruments.
Compact Rugged Construction
The slim design and rugged construction allow easy microphone placement while remaining road worthy.
Nickel Finish
The attractive nickel finish is non-reflective, making the microphone pleasing to the eye as well as the ear.

Key Features

Three different miniature microphones for all typical studio applications
Successor of the worldwide successful KM 85
Transformerless circuitry

Technical Specs

Acoustical operating principle
Pressure gradient transducer
Directional pattern
Hypercardioid
Frequency range
20 Hz … 20 kHz
Sensitivity at 1 kHz into 1 kohm
10 mV/Pa
Rated impedance
50 ohms
Rated load impedance
1 kohms
Equivalent noise level, CCIR
24 dB
Equivalent noise level, A-weighted
15 dB-A
Signal-to-noise ratio, CCIR (rel. 94 dB SPL)
70 dB
Signal-to-noise ratio, A-weighted (rel. 94 dB SPL)
79 dB-A
Maximum SPL (tube characteristic) for THD < 0.5 %
142 dB
Maximum output voltage
10 dBu
Supply voltage (P48, IEC 61938)
48 V ± 4 V
Matching connector
XLR 3F
Weight
80 g, 0.17 lbs
Diameter
22 mm
Length
107 mm