Neumann SKM 184 NI Stereo Set includes Two Each: KM184, SG21BK, WNS100 in One Woodbox Nickel Cheap Sale Tumblr

Neumann SKM 184 NI Stereo Set includes Two Each: KM184, SG21BK, WNS100 in One Woodbox Nickel

The Neumann SKM184NI Stereo Set includes Two Each: KM184, SG21BK, WNS100 in One Woodbox | Nickel is a kit containing a stereo matched pair of the KM 184 NI microphones. The microphones feature cardioid, pressure condenser elements intended for live sound reinforcement and broadcast as well as recording applications. The KM 180 series microphones feature an output stage based on the KM 100. Transformerless circuitry and balanced output result in high output gain with a very low noise floor and no coloration to the output signal. The KM 184 NI is powered via +48 Volt phantom power.
The stereo pair are matched in sensitivity and frequency response and provide optimum results when capturing performances or ambiance. The 20Hz to 20kHz frequency response provides flexibility for use in a wide range of recording situations. The KM 184 NI’s cardioid polar pattern provides a generous pick up area and is suitable for ambiance or spot miking instruments such as piano, wind instruments organ and choir. The KM 184 NI handles sound pressure levels up to 140dB allowing close miking of instruments high in transient (peak) level response.

Key Features

Three different miniature microphones for all typical studio applications
Successor of the worldwide successful KM 84
Transformerless circuitry

Technical Specs

Acoustical operating principle
Pressure gradient transducer
Directional pattern
cardioid
Frequency range
20 Hz … 20 kHz
Sensitivity at 1 kHz into 1 kohm
15mV/Pa
Rated impedance
50 ohms
Rated load impedance
1 kohms
Equivalent noise level, CCIR
22 dB
Equivalent noise level, A-weighted
13 dB-A
Signal-to-noise ratio, CCIR (rel. 94 dB SPL)
72 dB
Signal-to-noise ratio, A-weighted (rel. 94 dB SPL)
81 dB-A
Maximum SPL (tube characteristic) for THD < 0.5 %
138 dB
Maximum output voltage
10 dBu
Supply voltage (P48, IEC 61938)
48 V ± 4 V
Matching connector
XLR 3F
Weight
80 g, 0.17 lbs
Diameter
22 mm
Length
107 mm