Earthworks FW730 7 ft Cardioid Microphone System with Cast-Iron Base Cheap Sale Footlocker Finishline

Earthworks model FW730 7 ft Cardioid Microphone System with cast-iron base

The FlexWand is a combination of a 30kHz High Definition Microphone and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 7 feet and as low as 1.5 feet from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you dont have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand, position it and plug the mic cable into the base.

This product will be shipped in multiple boxes.

Key Features

• Uniform frequency response on or off axis
• Frequency response of 30Hz to 30kHz
• Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
• Large flex section near the center of the stand that couples the stand and the wand
• Mini-gooseneck between the end of the wand and the microphone head
• Substantial improvement in gain before feedback
• They will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
• Ideal where bands or orchestras are placed in front of a choir, as the FlexWand will reject much of the sound of the band or orchestra
• The near perfect polar response of the FlexWand allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
• The sturdy 12 pound cast iron base will not allow the FlexWand to be accidentally knocked over

Technical Specifications

Frequency Response:
30Hz to 30kHz ±2dB at 6 inches (15cm)

Polar Pattern:
Cardioid

Sensitivity:
10mV/Pa (-40dBV/Pa)

Power Requirements:
48V Phantom, 10mA

Max Acoustic Input:
145dB SPL

Output:
XLR (pin 2+)

Output Impedance:
100, balanced (50 ea. pin 2 & 3)

Min Output Load:
600 between pins 2 & 3

Noise:
22dB SPL equivalent (A weighted)

Positioning Range:
From 1.5 ft. to 7 ft. above floor level

Dimensions:
Stand 7- 2 long (2.18m), Base 12 (30.5cm)
in diameter, (2.7cm) high

Color:
Stand, flex & wand black, base dark gray

Weight:
Stand 2 lbs. (.9 kg), Base 12.6 lbs. (5.7kg)