Sanken CUB-01 Miniature Cardioid Boundary Microphone, Pigtail 3m Cable, Gray Exclusive Online

Sanken CUB-01-PT-GY Miniature Cardioid Boundary Microphone, Pigtail 3m Cable, Gray

With the CUB-01 it is now possible to capture a full bodied and clear sound. Narration and dialogue are clearly caught while excluding unnecessary background noise. Sanken’s revolutionary design has also eliminated the artificial need to overdesign the acoustic construction to create cardioid directivity.

Engineered for use in many situations, from TV and film field shooting to broadcast studio production and conference table recording, the CUB-01 departs from the common design of the boundary mic, which typically requires a large, heavy plate. By comparison, the CUB-01 is unbelievably small (32mm diameter, 12mm height, 45g weight) and light.

Because of its size, it is easy to conceal from the camera, and can be positioned in a variety of environments – for example, attached to the ceiling of a car with two-sided sticky tape. The CUB-01 is available in gray or beige and in two versions – the standard high performance CUB-01 which runs on 48 volt phantom and the CUB-01-PT (pigtail) version. The PT version will operate on 3 to 10 VDC for wireless applications.

Key Features

• Clear and rich sound
• Small and easy to conceal unlike other boundary mics
• Wide 60Hz-16kHz frequency response
• Sound energy in the high frequencies is identical with the mid and lows
• Perfect for TV and film field shooting, broadcast studio production and conference table recording
• New Sanken design that overcomes the limitations of previous boundary microphones

Technical Specifications

Sensitivity (at 1kHz)
3V power supplied: 15mV(-36.5dB±2dB)/Pa (0dB=1V/Pa)
12V power supplied: 16.8mV(-35.5dB±2dB)/Pa (0dB=1V/Pa)
Equivalent noise level (A weighted)
(at 3V): 17dB(A-weighted) IEC 179
(at 12V): 16dB(A-weighted) IEC 179
Max SPL
3V power supplied: 121 dB SPL (THD 1%, 1kHz)
12V power supplied: 127 dB SPL (THD 1%, 1kHz)
Output impedance( 1kHz )
120 OHM (1kHz), expected receive side impedance 5k OHM
Powering
3V to 14V(MAX) DC
Current consumption
3V power supplied: 0.6mA
12V power supplied: 1.3mA
Connector
Pig-tail: Cable direct out;
hot(signal)white
+DC voltage in:black
shield:ground
Dimensions
Microphone; D: 32.5mm, H: 14mm (1.3″x0.55″)