Audio-Technica AT2035 Side Address Cardioid Condenser Studio Microphone Buy Cheap Discounts

Audio-Technica AT2035 Side Address Cardioid Condenser Studio Microphone

Designed for critical home, project, and professional studio applications as well as live performance, the Audio-Technica AT2035 Side Address Cardioid Condenser Studio Microphone delivers exceptional detail and low noise. This microphone is equipped with a switchable 80 Hz high-pass filter and a 10 dB pad, allowing it to handle high sound pressure levels with ease. Its rugged construction and high-performance specifications provide an exceptional level of consistency from model to model, making it a reliable choice for any audio recording setup. The AT2035 comes with a protective pouch and a custom shock mount for superior isolation.

The large diaphragm of the AT2035 produces smooth, natural sound with low noise, and its high SPL handling and wide dynamic range provide unmatched versatility. The cardioid polar pattern reduces the pickup of sounds from the sides and rear, improving the isolation of the desired sound source. Whether you’re recording vocals, instruments, or anything else, the AT2035 ensures superior sound quality that meets the demands of professional audio work.

Key Features

• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range for versatility
• Custom shock mount for superior isolation
• Switchable 80 Hz high-pass filter and 10 dB pad
• Cardioid polar pattern for improved isolation of desired sound source
• Includes soft protective pouch

Specifications

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Freq. Response: 20-20,000 Hz
• Low Freq. Roll-Off: 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
• Impedance: 120 ohms
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range (Typical): 136 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 3.8 mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Dimensions: 170.0 mm (6.69″) long, 52.0 mm (2.05″) maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Audio-Technica Case Style: R5

Package Contents

• Audio-Technica AT2035 Microphone
• AT8458 Shock Mount
• 5/8″-27 to 3/8″-16 Threaded Adapter
• Soft Protective Pouch